warehouse lighting, high bay lighting hanging in warehouse

Working in an office or warehouse lights can be exhausting, but there are simple ways to save energy at work. Warehouse lights led that will help you stay comfortable and focused all day long.

For example, if you’re working in an office, invest in energy-saving light bulbs; these are significantly more expensive upfront than traditional light bulbs, but they last up to five times longer and use 80% less energy.

This means they’ll pay for themselves quickly and help keep your business running smoothly into the future.

2x2-LED Office Lights fixture

What are the 3 most common complaints about warehouse lighting?

According to a survey of more than 200 warehouse professionals, 56% of respondents cited excess heat and energy usage as their top complaints about warehouse lighting. Sixty-two percent also said that fixtures were an issue. Let’s take a look at some ways you can remedy these common issues and save energy in your warehouse.

Warehouse lights often cause excessive heat and energy consumption, but they don’t have to be that way. Many warehouse environments are equipped with lights, such as fluorescent light bulbs, which produce intense amounts of heat when turned on. The cost of cooling those spaces can add up quickly—but there are solutions available.

LED Bulb, LED Energy Efficiency

Change your bulbs to LEDs

Incandescent bulbs are much less efficient than LEDs. If you upgrade your warehouse light fixtures from incandescent to LED, you will see immediate savings in energy costs.

The average life of a fluorescent bulb is between 15,000 and 20,000 hours. Incandescent bulbs burn out by about 2,000 hours on average. So there’s another big difference between these two types of warehouse lights!

The life of a typical LED bulb is 25 times longer than an incandescent bulb! That means if you replace all of your old warehouse lights with LED lighting, they can last up to 15 years before needing replacement.

And that can save you quite a bit of money over time! LED lights are also more durable than other kinds of warehouse lights.

LED bulbs have no fragile filaments or glass components to break, so they don’t need protective covering or shields like CFLs do. This makes them very easy to install in high-traffic areas without worrying about damaging them. Not only do LED lights use less energy, but they also last longer and are more durable!

Add motion sensors

Motion sensors and light timers are another big energy-saving upgrade. Motion sensors detect motion nearby, and a light sensor can change brightness based on what time of day it is. This lets you turn off lights when no one’s in a room, or adjust brightness in rooms that only need low levels of light when they’re not occupied. Think of it as you think about other ways to save energy at work – whether that means turning down your thermostat or getting an automatic shutoff faucet.

Add daylight harvesting controls

With daylight harvesting controls, you can automatically turn on your lights when it gets dark, and off when it is light out. This helps save energy costs by only using your lights during hours that they are needed.

The controls will also prevent overuse of lighting since often times people forget to turn their lights off before leaving work in the evening or early morning.

wall pack mini on building

Learn more about daylight harvesting controls

Daylight harvesting controls can automatically switch your warehouse lights on when it’s darker and shut them off when it’s lighter outside. You can install daylight harvesting controls in your office, warehouse, or other spaces where you need people to be productive without draining office lighting costs.

LED 2x4 office lighting fixture

Power up with energy saving light fixtures, not loads of light bulbs

A major source of wasted energy in offices is incandescent and fluorescent light bulbs. If you’re using energy-saving lighting instead, you’ll save a lot of money on your electricity bill over time. So where should you focus your energy efficiency efforts first? The warehouse. Lighting up large areas takes a lot of power, which can be reduced by using LED lights that are designed to illuminate large spaces with just one or two fixtures. You’ll also want to invest in dimmable LED lights that allow you to reduce power consumption when not all areas are being used.

Update your control system’s software. Don’t forget those daylight harvesting sensors.

These work by looking at whether it’s dark or light outside. If it’s dark they will tell your HVAC system to turn on, if it’s light they will tell your HVAC system to turn off. Some sensors even have a default condition set, so if you want them always on you can do that.

solar path lighting

Ask yourself if you really need all those light bulbs. There may be other smart alternatives out there that help you save even more on your electric bill.

According to many sources, traditional light-bulbs use up more than 90 percent of their energy on heating and other non-lighting activities.

So if you’re really interested in saving energy, one of your first moves should be replacing all those incandescent bulbs with light emitting diodes (LEDs). Switching just five 25-watt incandescent bulbs to LEDs can save about $40 a year on lighting costs.

Now that’s money saved! You might also want to consider swapping out some of your office lighting fixtures for motion sensors. These devices are relatively inexpensive, can turn lights off when no one is around and then back on when they detect movement. Motion sensor lights aren’t perfect—they don’t work well in areas where there isn’t much activity—but they do help cut down on unnecessary power usage.

And, like LED bulbs, motion sensor lights last longer than traditional office lighting systems. If you run an industrial warehouse or factory, consider looking into new warehouse lights or retrofitting existing warehouse lights. Warehouse lighting differs from standard office lighting in a few ways: most importantly, it tends to use high-output fluorescent lamps instead of regular fluorescent lamps.

If your current warehouse lighting system uses fluorescent tubes as its main source of illumination, it’s probably time to upgrade; newer fluorescents consume far less electricity and produce better results overall.

Leave a Reply

Your email address will not be published.